Basic Info.
Model NO.
XFP-10GB-ER-cisco
Type
Optical Transceiver Module
Wiring Devices
Optical Fiber
Certification
CE, ISO, RoHS, Reach
Compatibility
Products Can Be Fully Compatible with The Market M
Transmission Distance
40km
Transmission Speed
up to 9.95 GB/S to 11.3 GB/S Bit Rates
Transport Package
Antistatic Bubble Shell and Carton
Specification
Length: 7.8 cm wide: 1.84cm high: 0.85cm
Product Description
EZOPTICS:XFP-10GB-ER
10 Gigabit 1550nm Single Mode XFP Optical Transceiver
XFP-10GB-ER Overview
EZOPTICS's XFP-10GB-ER-C10 10Gb/s optical transceivers are designed for IEEE 802.3ae 10GBASEER, 10GBASEEW, 10GFC and OC192 interconnects.The product implements digital diagnostics functions via a 2-wire serial interface, compliant with XFP Multi-Source Agreement (MSA) Specification.
Product Features
• Up to 9.95 Gb/s to 11.3 Gb/s bit rates.
• Compliant with IEEE 802.3ae, 10GBASE-ER/EW, 10GFC, OC192 application.
• Compliant with XFP MSA.
• Temperature-stabilized 1550nm EML laser and Receiver with PIN
• Standard bail mechanism for consistent installation and removal
• Built-in digital diagnostic functions.
• Hot Pluggable XFP footprint.
• Duplex LC Connectors.
• Up to 40km on SMF
• Low power consumption (Module work consumption <2.5W)
• RoHS Compliant
• Operating temperature range:0ºC to 70ºC
Applications
• 10GBASE-ER/EW 10G Ethernet
• 40km 10G Fiber Channel
• OC192 IR-2/STM S-64.2b
Ordering Information
Part Number | Description | Color on Clasp |
XFP-10G-ER | 10 Gigabit XFP Transceiver, LC Connectors, 1550nm, Single Mode Fiber 40km | Red |
For More Information: EZOptics Limited Web: ezoptics.en.made-in-china.com |
Absolute Maximum Ratings
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Storage Ambient Temperature | TS | -40 | | 85 | ºC | |
Supply Voltage 5V | VCC5 | -0.5 | | 5.5 | | |
Supply Voltage 3.3V | VCC3 | -0.5 | | 4 | V | |
General Specifications
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Data Rate | DR | 9.95 | | 11.3 | Gb/s | |
Bit Error Rate | BER | | | 10-12 | | |
Total Power Consumption | P | | | 2.5 | W | |
Supply Voltage -5V | VCC5 | 4.75 | 5.0 | 5.25 | V | 1 |
Supply Voltage-3.3V | VCC3 | 3.14 | | 3.46 | V | 1 |
Supply Current-VCC5 | ICC5 | | | 200 | | |
Supply Current-VCC3 | ICC3 | | | 500 | mA | |
Case Operating Temperature | TC | 0 | | 70 | ºC | 2 |
Notes:
1. Operating Environment
2. Case temperature
Link Distances
Data Rate | Fiber Type | Distance Range (km) |
9.95 -11.3 Gb/s | 9/125umSMF | 40 |
Optical - Characteristics - Transmitter
VCC5=4.75V to 5.25V,VCC3=3.14V to 3.46V,TC=0ºCto 70ºC
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Output Optical Power | PTX | -4 | | 4 | dBm | 1 |
Optical Center Wavelength | λ C | 1530 | | 1565 | nm | |
Extinction Ratio | ER | 8.2 | | | dB | |
Side Mode Suppression Ratio | SMSR | 30 | | | dB | |
Relative Intensity Noise | RIN | | | -130 | dB/Hz | |
Transmitter Dispersion Penalty | TDP | | | 2 | dB | |
Launch Power of OFF Transmitter | POUT_OFF | | | -30 | dBm | 1 |
Transmitter Jitter (Peak-to-Peak) | TJ | | | 0.1 | UI | |
Notes:
1. Average
Optical- Characteristics - Receiver
VCC5=4.75V to 5.25V,VCC3=3.14V to 3.46V,TC=0ºCto 70ºC
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Optical Receiver Power | PRX | -16 | | -1 | dBm | |
Optical Center Wavelength | λ C | 1260 | | 1600 | nm | |
Receiver Sensitivity (OMA)@10.3Gb/s | RX_SEN | | | -16 | dBm | 1 |
Receiver Reflectance | TRRX | | | -27 | dB | |
LOS Assert | LOSA | -25 | | | dBm | |
LOS De-Assert | LOSD | | | -18 | dBm | |
LOS Hysteresis | LOSH | 0.5 | | | dB | |
Notes:
1. Measured with worst ER: BER<10−12;231−1 PRBS
Electrical - Characteristics - Transmitter
VCC5=4.75V to 5.25V,VCC3=3.14V to 3.46V,TC=0ºCto 70ºC
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Input differential impedance | RIN | | 100 | | Ω | 1 |
Single ended data input swing | VIN_PP | 120 | | 820 | mV | |
Transmit disable voltage | VD | 2 | | VCC | V | 2 |
Transmit enable voltage | VEN | GND | | GND+0.8 | V | |
Transmit Disable Assert Time | | | | 10 | us | |
Notes:
1. After internal AC coupling
2. Or open circuit
Electrical - Characteristics - Receiver
VCC5=4.75V to 5.25V,VCC3=3.14V to 3.46V,TC=0ºCto 70ºC
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Single ended data output swing | VOUT_PP | 340 | 650 | 850 | mV | |
Data output rise time (20%-80%) | TR | | | 38 | ps | |
Data output fall time (20%-80%) | TF | | | 38 | ps | |
LOS Fault | VLOS_A | VCC-0.5 | | VCC_HOST | V | |
LOS Normal | VLOS_D | GND | | GND+0.5 | V | |
Notes:
1.20%-80%
Digital Diagnostic Functions
EZOPTICS's s XFP-10GB-ER incorporates a XFP compliant 2-wire management interface which is used for serial ID, digital diagnostics, and certain control functions. It is modeled on the SFF-8472 Rev 9.3 specification modified to accommodate a single 2-wire interface address. In addition to the basic I2C read/write functionality the modules support packet error checking that, when enabled, allows the host system to confirm the validity of any read data. Details of the protocol and interface are explicitly described in the MSA. The digital diagnostics provides real-time access to operating parameters via a 2-wire serial interface, including operating temperature, laser bias current, transmitted optical power, received optical power, and operating voltage.
Block-Diagram-of-Transceiver
Dimensions
ALL DIMENSIONS ARE ±0.2mm UNLESS OTHERWISE SPECIFIED
UNIT: mm
Electrical Pad Layout
Pin Assignment- Pin1 to Pin30
PIN # | Symbol | Description | Remarks |
1 | GND | Module Ground | 1 |
2 | VEE5 | Optional -5.2 Power Supply (Not required) | |
3 | Mod−Desel | Module De-select, when held low allows the module to respond to 2-wire serial interface commands | |
4 | Interrupt | Indicates presence of an important condition which can be read over the serial 2-wire interface | 2 |
5 | TX_DIS | Transmitter Disable, Transmitter laser source turned off | |
6 | VCC5 | +5V Power Supply | |
7 | GND | Module Ground | 1 |
8 | VCC3 | +3.3V Power Supply | |
9 | VCC3 | +3.3V Power Supply | |
10 | SCL | Serial 2-wire interface clock | 2 |
11 | SDA | Serial 2-wire interface data line | 2 |
12 | Mod_ABS | Module Absent; Indicates module is not present. Grounded in the module | 2 |
13 | Mod_NR | Module Not Ready; Indicates module operating fault | 2 |
14 | RX_LOS | Receiver Loss of Signal indicator | 2 |
15 | GND | Module Ground | 1 |
16 | GND | Module Ground | 1 |
17 | RD- | Receiver inverted data output | |
18 | RD+ | Receiver non-inverted data output | |
19 | GND | Module Ground | 1 |
20 | VCC2 | +1.8V Power Supply | |
21 | P_Down/RST | Power Down; When high, places the module in the low power stand-by mode and on the falling edge of P_Down initiates a module rest | |
Reset; The falling edge initiates a complete reset of the module including the 2-wire serial interface, equivalent to a power cycle |
22 | VCC2 | +1.8V Power Supply | |
23 | GND | Module Ground | 1 |
24 | RefCLK+ | Reference Clock non-inverted input, AC coupled on the host board | |
25 | RefCLK- | Reference Clock inverted input, AC coupled on the host board | |
26 | GND | Module Ground | 1 |
27 | GND | Module Ground | 1 |
28 | TD- | Transmitter inverted data input | |
29 | TD+ | Transmitter non-inverted data input | |
30 | GND | Module Ground | 1 |
Notes:
1.Module ground pins (GND) are isolated from the module case and chassis ground within the module
2.Open collector, should be pulled up with 4.7kΩ-10kΩ on host board to a voltage between 3.15V and 3.6V
References
1.10 Gigabit Small Form Factor Pluggable Module(XFP)Multi-Source Agreement(MSA),Rev4.5 - August 2005.
Address:
No. 5B, Yinhu Road, Yuyitang Community, Tangxia Town, Dongguan City, Guangdong Province, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Arts & Crafts, Electrical & Electronics, Industrial Equipment & Components, Sporting Goods & Recreation
Management System Certification:
ISO 9001
Company Introduction:
EZOptics limited is a research and development, production, sales in one of the professional optical communication products manufacturers. The company has a professional, high-quality work team, adhering to the "must be timely delivery, must plug and play, must be quality and cheap" business philosophy, to provide customers with reliable quality assurance and quality service. The optical communication products of Sanyi Electronic Technology are widely compatible with all brands of switches and provide three year quality assurance services to help customers save costs and achieve higher value.
The company′s product line covers a wide range of types and has the ability to be fully compatible with all kinds of mainstream switch systems; Mature technology and manufacturing process, professional development team.
Business scope: Optical communication products, optical transceiver modules, high-speed cables, active optical cables, wavelength division multiplexers; Products can be used for data center and computer room equipment connection.
Main products: Optical Module, Optical Fiber Module, Optical Transceiver Module, SFP Optical Transceiver Module, CWDM SFP Optical Module, Bidi SFP Optical Module, XFP Optical Transceiver Module, SFP DWDM.
Product rate: 1.25G, 2.5G, 6.144G, 3.07G, 2.67G, 8.5G, 10G, 25G, 40G, 100G.
Product packages include: QSFP28, QSFP+, SFP28, SFP, SFP+, XFP
Our products can be widely used in various networks, such as: Data center, telecommunication network, data transmission network, enterprise network, storage switching network, metropolitan area network and CWDM/DWDM network.