Basic Info.
Model NO.
SFP-10G-SR-H3C-C01
Type
Optical Fiber Module
Wiring Devices
Optical Fiber
Certification
CE, ISO, RoHS, Reach
Compatibility
Products Can Be Fully Compatible with The Market M
Transmission Distance
300m
Transport Package
Antistatic Bubble Shell and Carton
Specification
Width: 13.5mm high 8.5mm
Product Description
EZOPTICS:SFP-10G-SR
10Gb/s SFP+ Short Wavelength (850nm) Transceiver
SFP-10G-SR Overview
EZOPTICS'S SFP-10G-SR SFP+ optical transceivers are based on 10G Ethernet IEEE 802.3ae standard and SFF-8431 standard, and provide a quick and reliable interface for the 10G Ethernet application. The digital diagnostics functions are available via 2-wire serial bus specified in the SFF-8472.
Product Features
• Supports from 9.83 Gb/s to 11.3 Gb/s bit rates
• Compliant with IEEE 802.3ae 10GBASE-SR/SW
• Compliant with SFF-8431
• Hot−pluggable SFP+ footprint
• 850nm VCSEL laser transmitter
• Duplex LC connector
• Built-in digital diagnostic functions
• Up to 300m on OM3 MMF
• Low power consumption (Module work consumption <1.5W)
• Single power supply 3.3V
• RoHS Compliant
• Class 1 laser product complies with EN 60825−1
• Operating temperature range:0ºC to 70ºC
Applications
• 10GBASE-SR/SW Ethernet
• 10G Fibre Channel
• 10G CPRI
Ordering Information
Part Number | Description | Color on Clasp |
SFP-10G-SR | 10GBASE-SR SFP+ 850nm LC Connectors 300m on MMF, with DOM function. | Black |
For More Information: SfpCodingBox (Dongguan) Limited Web: ezoptics.en.made-in-china.com |
General Specifications
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Data Rate | DR | 9.83 | 10.3125 | 11.3 | Gb/s | 1 |
Bit Error Rate | BER | | | 10-12 | | |
Operating Temperature | TOP | 0 | | 70 | ºC | 2 |
Storage Temperature | TSTO | -40 | | 85 | ºC | 3 |
Supply Current | ICC | | 180 | 220 | mA | 4 |
Input Voltage | VCC | 3.14 | 3.3 | 3.46 | V | |
Maximum Voltage | VMAX | -0.5 | | 4 | V | 4 |
Notes:
1. IEEE 802.3ae
2. Case temperature, commercial temperature
3. Ambient temperature
4. For electrical power interface
Link Distances
Data Rate | Fiber Type | Modal Bandwidth @850nm (MHz-km) | Distance Range (m) |
9.83-11.3 Gb/s | 62.5/125umMMF | 160 | 2-26 |
9.83-11.3 Gb/s | 62.5/125umMMF | 200 | 2-33 |
9.83-11.3 Gb/s | 200 2-33 9.83-11.3 Gb/s 5 | 400 | 2-66 |
9.83-11.3 Gb/s | 200 2-33 9.83-11.3 Gb/s 5 | 500 | 2-82 |
9.83-11.3 Gb/s | 200 2-33 9.83-11.3 Gb/s 5 | 2000 | 2-300 |
Optical - Characteristics - Transmitter
VCC=3.14V to 3.46V, TC=0ºC to 70ºC
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Output Optical Power | PTX | -7 | | -1 | dBm | 1 |
Optical Center Wavelength | λ C | 840 | | 860 | nm | |
Optical Modulation Amplitude | OMA | | -1.5 | | dBm | 2 |
Extinction Ratio | ER | 3 | 5.5 | | dB | |
Spectral Width(− 20 dB) | Δλ | | | 0.45 | nm | |
Relative Intensity Noise | RIN | | | -128 | dB/Hz | |
Transmitter Dispersion Penalty | TDP | | | 3.9 | dB | |
Transmitter Jitter | | | | | | 3 |
Launch Power of OFF Transmitter | POUT_OFF | | | -30 | dBm | 1 |
Notes:
1.Average
2. IEEE 802.3ae
3.According to IEEE 802.3ae requirement
Electrical - Characteristics - Transmitter
VCC=3.14V to 3.46V, TC=ºC to 70ºC
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Optical Center Wavelength | λC | 840 | | 860 | nm | |
Receiver Sensitivity(OMA)@10.3Gb/s | RX_SEN1 | | | -11.1 | dBm | 1 |
Stressed Receiver Sensitivity in (OMA)@10.3Gb/s | RX_SEN2 | | | -7.5 | dBm | 2 |
Maximum Input Power | PRX | 0.5 | | | dBm | |
Receiver Reflectance | TRRX | | | -12 | dB | |
LOS Assert | LOSA | -30 | | | dBm | |
LOS De-Assert | LOSD | | | -14 | dBm | |
LOS Hysteresis | LOSH | 0.5 | | | dB | |
Notes:
1.Measured with worst ER;BER<10−12;231-1 PRBS
2. IEEE 802.3ae
Electrical - Characteristics - Receiver
VCC=3.14V to 3.46V, TC=ºC to 70ºC
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Input differential impedance | RIN | | 100 | | Ω | |
Differential data input swing | VIN PP | 180 | | 700 | mV | |
Transmit disable voltage | VD | 2 | | VCC | V | |
Transmit enable voltage | VEN | VEE | | VEE+0.8 | V | |
Electrical - Characteristics - Receiver
VCC=3.14V to 3.46V, TC=ºC to 70ºC
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Single ended data output swing | VOUT_PP | 300 | | 800 | mV | |
Data output rise/fall time (20%-80%) | TR/TF | | 30 | | ps | |
LOS Fault | VLOS_A | 2 | | VCC_HOST | V | |
LOS Normal | VLOS_D | VEE | | VEE+0.5 | V | |
Digital Diagnostic Functions
SFP-10G-SR supports the 2-wire serial communication protocol as defined in the SFF-8472. Digital diagnostic information is accessible over the 2-wire interface at the address 0xA2. Digital diagnostics for SFP10-SR are internally calibrated by default. A micro controller unit inside the transceiver gathers the monitoring information and reports the status of transceiver.
Transceiver Temperature, internally measured, represented as a 16 bit signed twos complement value in increments of 1/256 degrees Celsius, Temperature accuracy is better than ±3 degrees Celsius over specified operating temperature and voltage.
Transceiver Supply Power, internally measured, represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 - 65535) with LSB equal to 100 µVolt, yielding a total range of 0 to +6.55 Volts.
Transceiver TX bias current, internally measured, represented as a 16 bit unsigned integer with the current defined as the full 16 bit value (0 - 65535) with LSB equal to 2 µA, yielding a total range of 0 to 131mA. Accuracy is better than ±10% over specified operating temperature and voltage.
Transceiver TX output power, internally measured, represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 -65535) with LSB equal to 0.1 µW. Data is assumed to be based on measurement of laser monitor photodiode current. Accuracy is better than ±3dB over specified temperature and voltage. Data is not valid when the transmitter is disabled.
Transceiver RX received optical power, internally measured, represented as a 16 bit unsigned integer with the power defined as the full 16 bit 35 value (0 -65535) with LSB equal to 0.1 µW. Accuracy is better than ±3dB over specified temperature and voltage.
Block-Diagram-of-Transceiver
Transmitter Section
The VCSEL driver accept differential input data and provide bias and modulation currents for driving a laser. An automatic power-control (APC) feedback loop is incorporated to maintain a constant average optical power. 850 nm VCSEL in an eye safe optical subassembly (OSA) mates to the fiber cable.
TX_DISABLE
The TX_DISABLE signal is high (TTL logic "1") to turn off the laser output. The laser will turn on within 1ms when TX_DISABLE is low (TTL logic"0").
TX_FAULT
When the TX_FAULT signal is high, output indicates a laser fault of some kind. Low indicates normal operation.
Receiver Section
The receiver utilizes a PIN detector integrated with a trans-impedance preamplifier in an OSA. This OSA is connected to a Limiting Amplifier which providing post-amplification quantization, and optical signal detection. The limiting Amplifier is AC-coupled to the transimpedance amplifier, with internal 100Ω differential termination.
Receive (RX_LOS)
The RX_LOS is high (logic "1") when there is no incoming light from the companion transceiver. This signal is normally used by the system for the diagnostic purpose. The signal is operated in TTL level.
Controller Section
The micro controller unit monitors the operation information of LD driver and Limiting Amplifier. And report these status to the customer.
Dimensions
ALL DIMENSIONS ARE ±0.2mm UNLESS OTHERWISE SPECIFIED
UNIT: mm
Electrical Pad Layout
Pin Assignment
PIN # | Symbol | Description | Remarks |
1 | VEET | Transmitter ground (common with receiver ground) | 1 |
2 | T_FAULT | Transmitter Fault. | |
3 | T_DIS | Transmitter Disable. Laser output disabled on high or open | 2 |
4 | SDA | 2-wire Serial Interface Data Line | 3 |
5 | SCL | 2-wire Serial Interface Clock Line | 3 |
6 | MOD_ABS | Module Absent. Grounded within the module | 3 |
7 | RS0 | No connection required | |
8 | LOS | Loss of Signal indication. Logic 0 indicates normal operation | 4 |
9 | RS1 | No connection required | 1 |
10 | VEER | Receiver ground (common with transmitter ground) | 1 |
11 | VEER | Receiver ground (common with transmitter ground) | 1 |
12 | RD− | Receiver Inverted DATA out. AC coupled | |
13 | RD+ | Receiver Non-inverted DATA out. AC coupled | |
14 | VEER | Receiver ground (common with transmitter ground) | 1 |
15 | VCCR | Receiver power supply | |
16 | VCCT | Transmitter power supply | |
17 | VEET | Transmitter ground (common with receiver ground) | 1 |
18 | TD+ | Transmitter Non-Inverted DATA in. AC coupled | |
19 | TD- | Transmitter Inverted DATA in. AC coupled | |
20 | VEET | Transmitter ground (common with receiver ground) | 1 |
Notes:
1. Circuit ground is isolated from chassis ground
2. Disabled:TDIS>2Vor open, Enabled: TDIS<0.8V
3. Should Be pulled up with 4.7k -10k ohm on host board to a voltage between 2V and 3.6V
4. LOS is open collector output
References
1. IEEE standard 802.3ae. IEEE Standard Department,2005.
2. Enhanced 8.5 and 10 Gigabit Small Form Factor Pluggable Module "SFP+"-SFF-8431
3. Digital Diagnostics Monitoring Interface for Optical Transceivers -SFF-8472.
Manner of Packing
Address:
No. 5B, Yinhu Road, Yuyitang Community, Tangxia Town, Dongguan City, Guangdong Province, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Arts & Crafts, Electrical & Electronics, Industrial Equipment & Components, Sporting Goods & Recreation
Management System Certification:
ISO 9001
Company Introduction:
EZOptics limited is a research and development, production, sales in one of the professional optical communication products manufacturers. The company has a professional, high-quality work team, adhering to the "must be timely delivery, must plug and play, must be quality and cheap" business philosophy, to provide customers with reliable quality assurance and quality service. The optical communication products of Sanyi Electronic Technology are widely compatible with all brands of switches and provide three year quality assurance services to help customers save costs and achieve higher value.
The company′s product line covers a wide range of types and has the ability to be fully compatible with all kinds of mainstream switch systems; Mature technology and manufacturing process, professional development team.
Business scope: Optical communication products, optical transceiver modules, high-speed cables, active optical cables, wavelength division multiplexers; Products can be used for data center and computer room equipment connection.
Main products: Optical Module, Optical Fiber Module, Optical Transceiver Module, SFP Optical Transceiver Module, CWDM SFP Optical Module, Bidi SFP Optical Module, XFP Optical Transceiver Module, SFP DWDM.
Product rate: 1.25G, 2.5G, 6.144G, 3.07G, 2.67G, 8.5G, 10G, 25G, 40G, 100G.
Product packages include: QSFP28, QSFP+, SFP28, SFP, SFP+, XFP
Our products can be widely used in various networks, such as: Data center, telecommunication network, data transmission network, enterprise network, storage switching network, metropolitan area network and CWDM/DWDM network.